1. High reliability Special drive power for LED street lights, installed at high altitude, with waterproof aluminum shell drive power supply

2. High efficiency LED is an energy-saving product, and the efficiency of driving power supply is high.3. High power factor is the grid's load requirements.4. Drive mode There are two types of traffic: one is a constant voltage source for multiple constant current sources, and each constant current source supplies power to each LED separately.5. Surge Protection LED's ability to withstand surge is relatively poor, especially against reverse voltage capability.6. Protection function In addition to the conventional protection function, it is better to increase the LED temperature negative feedback in the constant current output to prevent the LED temperature from being too high.7. Protection aspects The external installation of the lamp, the power supply structure should be waterproof and moisture-proof, and the outer casing should be light-resistant.8. The life of the drive power should be matched to the life of the LED.9. To comply with safety and electromagnetic compatibility requirements.

Product Parameter	Parameter Description
JINYINGModel	PSW-01
Product Name	IP67 Waterproof Electronic LED Driver
Input Voltage	AC90-250V 50/60Hz
Rated Output Power	75W
Output Current Range	12V5A
Waterproof Rating	IP67
Application	Used in LED Lamps such as Lampposts,street lamps, spotlights, etc
Rated Input Voltage	AC90-250V
Rated Input Frequency	50-60Hz
Input Frequency Range	47-63Hz
MAX.Input Current	0.6A@180VAC
Output Voltage Ripple	Vp-p MAX<80mv
Dimension	145*51*32mm
Packing box	160*65*45mm
Weight	0.36kg
Cable's length	155~160mm
Input and Output Wiring Terminal	Input Three Core Black Line, 300mm, 0.75mm2
	Brown Line: L
	Blue Line: N
	Yellow Line: Ground
	Output 2 wires: 12V and GND
Operating Temperature Range	-25℃ ~ 60℃
Operating Temperature Range	-40℃ ~ 70℃
Humidity	30%~100% relative humidity(no condensation)
Temperature Protection	The product is internally set to 85 degrees of protection, and the automatic drama recovery after temperature drop
Overvoltage Protection	When the product fails, the output voltage reaches 130% of the rated voltage. The internal components of the product break down and there is no output, thus protecting the external equipment.
Short-circuit Protection	When the output is short-circuited, the product is protected and the input mode is less than 20W.
Overcurrent Protection	When the current reaches 6A-7.5A, the product protection has no output.

?